How do you descale your JURA D6 coffee machine?
Get started with descaling
In this video, we'll show step-by-step how to descale your coffee machine. Descaling takes about 45 minutes. We'll go through these steps with you:
- Step 1. Prepare for descaling
- Step 2. Start descaling
- Step 3. Rinse the machine
You need:
- JURA Descaling Tablets (3 units)
- Measuring cup of at least 500ml
- Container of at least 500ml
Do you use a water filter? Remove it from the water tank when you descale. Place it back after descaling, or replace it with a new water filter.
How often should you descale?
The JURA D6 will give you a notification when you have to descale the machine. If you replace the Claris Smart water filter on time, you'll only have to descale the coffee machine once every 2 years. That's because this water filter prevents 99% of the limescale. We recommend that you use JURA descaling tablet. That way, you're sure you clean the coffee machine the right way, without damaging the machine. You can also make sure the warranty of the coffee machine doesn't void, which can happen if you use the wrong cleaning agents.
Step 1: prepare the descaling
- on the display, 'Descale/Cappucc' appears. Press the red icon with 5 water drops until 'Empty tray' appears.
- Remove the drip tray and the coffee grounds container, empty both, and put them back.
- the display shows 'Agent in tank'. Remove the water tank from the coffee machine and empty it in the sink.
- measure 500ml water and add 3 descaling tablets.
Step 2: descale the machine
- pour the water with the dissolved tablets in the water tank.
- place the water tank back into the coffee machine.
- place a container of at least 500ml under the coffee spout and fine foam frother.
- turn the switch to the steam symbol.
- now hot water flows from the machine.
- the display shows when to turn the switch back to it's starting position 'I'.
- the coffee machine now pours water via the coffee spout. This will automatically stop.
- 'Empty tray' will appear on the display. Remove the container, the drip tray, and the coffee grounds container. Empty all 3 and put them back.
- take the water tank out of the machine, empty it, and rinse it thoroughly.
- fill the water tank to max. and place it back in the coffee machine.
Step 3: rinse the machine
- turn the switch to the steam symbol. The coffee machine will now rinse with just water.
- at some point, the display will indicate to close the switch again. Turn the switch back to its starting position 'I'.
- the coffee machine will pour water one more time. This will automatically stop.
- the display will show 'Empty tray'. Remove the container, drip tray, and coffee grounds container and empty them. Place the drip tray and coffee grounds container back.
- the display will show the start menu again.
- your JURA D6 is ready for use again.
Get all the maintenance products you need
- Maintain your machine for half a year.
- Extends the lifespan and prevents defects.
- More affordable to purchase than separate products.
- Maintain your machine for 1 year.
- Extends the lifespan and prevents defects.
- More affordable then 2 maintenance packs of half a year.
