The most common errors of Zanussi washing machines

If the washing machine displays the error code Eb0 or Ebo, then the appliance isn't getting enough power. This might be because the voltage of the power supply is too low. Check this by connecting the washing machine somewhere else. Check if the plug is in a grounded socket as well. Does the error message remain? Reset the appliance by leaving the plug out of the socket for at least 30 seconds.

An E40 error on a Zanussi washing machine points to a malfunctioning door. First, check if the door is properly closed. Make sure there's no laundry trapped between the washing machine and the door. If the washing machine is completely full, the problem might be that the drum is overloaded. Remove some clothes to be sure. Finally, check the child safety lock. The included manual explains how you can turn this off.

Does the display say EFO, EFo, or EF3? Then there's internal leakage and water at the bottom of the drum. This is often caused by a piece of clothing or shoelace between the door on the cuff. Turn off the washing machine first and remove the plug from the socket. Detach the water hose and tilt the machine backwards slightly, so some of the water runs out. After this, you can reconnect everything and remove the stuck clothing items.

Does the display of your Zanussi washing machine show the error code E10 or C1? Then there's a problem with the water supply. That means your washing machine isn't getting any water or isn't getting enough water. First, check if the washing machine is properly connected to the water supply. It's possible that the drain hose is blocked or there's a kink in it. If that's the case, you can remove the kink. Sometimes it helps to turn the washing machine off and on again.

If the error code E20 or C2 appears, then the machine has a problem pumping the water. First, check if the drain hose isn't inserted too deep into the drain. The hose should be inserted no further than 10cm into the drain. If that isn't the case, check to see if the drain pump or the drain is blocked. These are both easy to clean.

Do you have a Zanussi washing machine without a display? You can recognize the error by a combination of lights on the washing machine. Contact Zanussi to solve the problem. They'll have a look at the possible cause with you.

As a final solution, unplug the plug from the socket and wait 30 minutes before you plug it in again. Do you still see an error? Sometimes, you need a technician. Our white goods experts are happy to help you with repairing your appliance. Did you buy your washing machine at Coolblue? Register it via our online return form in your account. You can find it in your account at 'returns and repairs'. Didn't you buy the appliance at Coolblue? Please contact our repair service.