Written by Charlotte 1 December 2023 12:26

How do you place the Claris Smart water filter in your JURA E6 or E60?

We'll show you step-by-step how to place the Claris Smart water filter in your JURA E6. The water filter prevents limescale. Once the limescale settles in your machine, it shortens the lifespan of the appliance. You should replace the water filter once every 3 months.

Video instructions
How often should it be replaced?
Remove the old water filter
Rinse the water filter

Get started with the water filter

Follow the instructions in the video to place the water filter the right way. This takes about 10 minutes. We'll take you through the steps:

Step 1. Remove the old water filter
Step 2. Install the new water filter
Step 3. Rinse the water filter

You need:

JURA Claris Smart water filter
Container of at least 500ml

How often should you replace the water filter?

JURA Claris Smart+ Water Filter

35 reviews

Suitable for JURA machines | Makes descaling unnecessary | Replace every 3 months

14,99

in stock

You replace the water filter once every 3 months. The water filter communicates with the coffee machine via Bluetooth. You'll see a notification on the display when your water filter needs to be replaced. This smart water filter works in a very targeted way and prevents 99% of the limescale, which means descaling isn't really necessary anymore. This saves you work. But, it's important you replace the filter in time. You can use the Claris Smart water filter by JURA for this.

Step 1. remove the old water filter

on the display, the water filter replacement icon appears at the bottom center.
take the water tank out of the machine and empty it in the sink.
remove the old water filter from the water tank with the included attachment.
turn the water filter counterclockwise and take it out of the machine.
place the new water filter in the empty water tank. Turn the water filter clockwise until you hear it click.

Step 2: rinse the water filter

fill the water tank up to 'max' with fresh water and place it back into the coffee machine.
the display first displays 'Saved'. Then 'Open switch'.
place a container with at least 500ml capacity where the water comes out.
turn the switch from the 'I' to the coffee cup with drops.
the machine thoroughly rinses the water filter and stops this automatically after a couple of seconds.
'Close switch' appears on the display. Turn the switch back to 'I'.
remove the container and empty it.
the water filter of your JURA E6 has been installed successfully.