How do you descale your JURA E6 coffee machine?
Get started with descaling
The video shows step-by-step how to descale your coffee machine. Descaling takes about 40 minutes. The coffee machine has a descaling program that you can easily select via the display. We'll go through a few steps with you:
- Step 1: prepare the descaling
- Step 2: start the descaling
- Step 3: rinse the machine
Requirements:
- JURA Descaling Tablets (3 units)
- Measuring cup of at least 500ml
- Container of at least 500ml
Do you use a water filter? Remove it from the water tank when you descale. Place it back after descaling, or replace it with a new water filter.
How often should you descale?
The JURA E6 will notify you when you need to descale it. When you replace the Claris Smart water filters in time, you don't really need to descale any more. This water filter prevents 99% of limescale buildup. How often you need to descale depends on the amount of calcium in your tap water. You can assume about once every 2 years. We recommend that you use JURA descaling tablets. This cleaning agent is precisely adjusted to your coffee machine, so you're sure you don't damage the machine. You also make sure you don't void the warranty of the coffee machine, which can happen if you use the wrong cleaning agents.
Step 1: prepare the descaling
1: on the display, you'll see a notification to descale the machine 2: press the 'P' icon and 5 water droplets in the bottom left 3: press 'Start' at the bottom right 4: on the display, you'll see a warning that you should only use JURA maintenance products. Press 'Continue' 5: empty the drip tray and coffee grounds container and place them back into the machine 6: remove the water tank from the coffee machine and empty it in the sink 7: fill the measuring cup with 500ml fresh water and 3 descaling tablets. Leave the tablets in for several minutes 8: pour the water in the water tank, and place the water tank back into the coffee machine
Step 2: descale the machine
1: place the container below the coffee nozzle and hot water nozzle 2: twist the switch open to the coffee cup with 2 droplets above it 3: the machine will now produce hot water, which takes a couple of minutes 4: on the display, you'll see 'close switch'. Rotate the switch back to its starting position 'I' 5: remove the container, drip tray, and coffee grounds container, and empty them in the sink. Place them back where they came from 6: remove the water tank from the machine and rinse it well 7: fill the water tank with fresh water up to the 'max' indication, and place the water tank back 8: make sure the container is still under the coffee and hot water nozzle
Step 3: rinse the machine
1: press the button 'continue' at the bottom right 2: rotate the switch open to the coffee cup with 2 droplets above it 3: the machine now rinses with only water for a few minutes 4: rotate the switch back to its starting position 'I', so this shows on the display 5: for the last time, remove the drip tray, coffee grounds container, and container. Empty them in the sink, and place the drip tray and coffee grounds container back 6: the display will now show 'descaling complete' 7: your JURA is now ready for use again
Get all the maintenance products you need
- Maintain your machine for half a year.
- Extends the lifespan and prevents defects.
- More affordable to purchase than separate products.
- Maintain your machine for 1 year.
- Extends the lifespan and prevents defects.
- More affordable then 2 maintenance packs of half a year.
