How do you fix a Haier dryer malfunction yourself?
Haier error E6
If you see the error code E6, the lint trap of your Haier dryer is full. Clean the filter:
1: take the lint trap out of your dryer. 2: remove large clumps of dust from the lint trap. 3: vacuum the slot for the lint trap with a vacuum. 4: put the lint trap back.
In order to prevent this problem, it's important that you clean the lint trap after each dryer cycle.
Haier error F2
It's possible that the drain pump of your Haier dryer is broken. Haier recommends you call in a technician.
Haier error F31 or F32
The display indicates error code F31 or F32. This can mean your Haier dryer has short-circuited or the condenser has overheated.
1: turn the dryer off. 2: unplug the connector for 10 minutes. 3: plug the connector back in and test if the drying cycle works now.
Haier error F4
With a Haier error code F4, the drum doesn't heat up. Haier recommends you call in a technician.
Haier error F5
The error code F5 indicates a communication error between the module and the display of your Haier dryer. Unplug the connector for 5 minutes and test if the cycle works again.
Haier error '/'
Do you see '/' on the display of your Haier dryer? That means the condenser reservoir of your dryer is full.
1: remove the condensation reservoir. 2: empty the condensation reservoir. 3: put it back in place.
Error 'empty reservoir' appears
When the light for the condenser reservoir comes on, the container is full. Remove the reservoir from the dryer and empty it in the sink. When you put the container back and start the dryer cycle, the notification should disappear. Is your dryer connected to the water drain and do you still see this error? Check the manual to learn how you can manually turn off the light. Also make sure there's no loop in the drain hose. In addition, the drain shouldn't be higher up than 1m.
Problem not solved?
The last step is to try and reset the dryer. Unplug the connector from the socket and wait 30 minutes before you start the cycle again. Not successful? You need an expert. If your appliance is still covered by the warranty, simply fill out an online return form with a repair request. Isn't it covered by the warranty anymore? Our experienced technicians are still happy to help you for a fee. They'll have a look at the problem with you and will repair the appliance at your home.
