How do you build in a built-in washer dryer combination?
Build in a washer dryer combination
To build your built-in washer dryer combination into your cabinets, follow the steps below:
- Step 1. connect the washer dryer combination
- Step 2. attach the hinges to the door
- Step 3. mount the door to the washer dryer combination
- Step 4. mount the magnet
Step 1: connect the washer dryer combination
When you build in a washer dryer combination, it's important that you first fully connect it. Remove the transit bolts, connect the supply hose and drain hose, and plug it into a suitable socket. Lastly, level the appliance and slide it in the right place. You can read how to do all these steps in the article below.
Step 2: attach the hinges to the door
Now that your washer dryer combination is connected in the right spot, it's time to mount the doors. Use the included hinges of your built-in washer dryer combination for this. First attach the hinges to the door. You do this by placing the hinges in the predrilled holes in the door. Screw the hinge onto the door panel with the included screws. You can read how to mount the hinges of your washer dryer combination in the manual.
Step 3: mount the door to the washer dryer combination
When the hinges are attached to the door, you can mount the door to your washer dryer combination. A built-in washer dryer combination always has prepared hinge supports or hinge holes. That way, you don't have to screw holes into the appliance in order to mount the door. Slide and/or screw the hinge to the washer dryer combination in the right spot. You can read how to do this in the manual of your appliance. Is the door even with the other cabinets? It's time for the last step.
Step 4: mount the magnet
To make sure the cabinet door doesn't vibrate open while washing, use the included magnet. Is the magnetic surface not on your appliance by default? Mount it to the spot with the prepared screw holes first, just above the highest hinge. Then measure how high the magnetic surface is on the appliance and mount the other half to the door at the same height. If the magnetic surface is already on the appliance, you just have to mount the magnet to the door.
Would you like a freestanding washer dryer combination? Click the link below.
